Here is an email I received today:
I brought the Badge-a-minit handpress button maker from their main website, and I found it really difficult to assemble the button due to a lack of force. My dad is able to do it without any problem, but I can’t press down the purple+green ring even if I am standing up, pressing with two hands. All the buttons that I tried on my own failed.
My question is, does the Professional button machine requires as much strength as the badge-a-minit set? Or is it less strength demanding? I need to know it before I purchase it.
I have another question. Can we use the badge-a-minit circle cutter for the professional button machine? Or do we have to get the other button cutter.
Here’s my response:
The 2-1/4″ (m225) button machine is much easier to use and is more precise when making a button. You will not have to worry about a button not coming out correctly. Just don’t put more than one button component in the machine and don’t forget the mylar. These are just some of the common mistakes.
The more the machine is used the easier it becomes. You will notice that there is grease on the moving parts of the machine also. You will want to keep this lubricated if it dries out.
The Badge-a-Minit cutter will cut a circle larger than needed for
this machine. If you move the blade to the smaller diameter, it will
be too small. You can visit the Button Resources link and find the 2-1/4″ Standard Layout Sheet.
You may be happier with a handy circle cutter, rotary cutter or even a graphic punch. It just depends on your budget and production needs.
